@phdthesis{digilib35107,
           month = {August},
           title = {RANCANG BANGUN ALAT CONVERTER
KABEL UTP (UNSHIELDED TWISTED PAIR) MENGGUNAKAN
MIKROKONTROLER ARDUINO UNO},
          school = {UIN SUNAN KALIJAGA YOGYAKARTA},
          author = {NIM.  13651078 ANGGORO PRISTYO PENDROJOYO PRANOMO},
            year = {2018},
            note = {Dr. Bambang Suguantoro, M.T.,},
        keywords = {UTP Cable, Converter, Arduino Uno Microcontroller, Relay},
             url = {https://digilib.uin-suka.ac.id/id/eprint/35107/},
        abstract = {In a network with establishment of a LAN (Local Area Network) or a peer
to peer network in need of UTP cable types of crossover and straight. Cable types
of crossover and straight have the function and arrangement of cables different
sequences at the ends A and B. tip if you want to create a LAN network or peer to
peer as the data transmission media should create both types of cables. Kaera each
type of cable has a different function, it cannot be used if one type of crossover or
straight cable has the same function. In the preparation of crossover and straight
cable types, errors often occur in the order of the sequence, so that if the
rearrangement is made, the UTP cable must be cut and the RJ45 connection must
be replaced, and so on if there is an error in repetitive preparation.
Based on existing problems, it can be built a UTP (Unshielded Twisted
Pair) cable converter tool. The tool built is a prototype cable cable using a
microcontroller and relay, to be able to arrange the crossover type UTP cable into
straight and vice versa.
From the research that has been done, it is found that UTP (Unshielded
Twisted Pair) cable converter prototype uses a microcontroller and the relay has
been successfully built and functions to convert / convert crossover type UTP cable
into straight and straight into a crossover.}
}