%0 Thesis %9 Skripsi %A Nindah Novitasari, NIM.: 16630004 %B FAKULTAS SAINS DAN TEKNOLOGI %D 2020 %F digilib:43271 %I UIN SUNAN KALIJAGA YOGYAKARTA %K Microbial fuel cell, KMnO4, tempe waste, pottery, power density, COD, BOD %P 80 %T PENGARUH VARIASI KONSENTRASI KMnO SEBAGAI KATOLIT TERHADAP POWER DENSITY DAN PENURUNAN 4 COD/BOD SUBSTRAT LIMBAH TEMPE PADA MICROBIAL FUEL CELL (MFC) BERBASIS MEMBRAN GERABAH %U https://digilib.uin-suka.ac.id/id/eprint/43271/ %X Research to study the effect of variations in the concentration of KMnO4 as a catholite on Microbial Fuel Cell (MFC) based on tempe waste and pottery membranes has been carried out. This study aims to determine the electricality and reduction of COD anf BOD of tempe waste on MFC substrates based on variations in the conceration of potassium permanganate catholite (KMnO4). The MFC used in the form of a dual chamber with a pottery membrane as a cation exchange, the anode chamber containing the tempeh liquid waste substrate and the cathode space containing the KMnO4 solution varied from 0.10 M, 0.15 M and 0.20 M. This research was conducted for 48 hours and Measurement of voltage and current is carried out every 2 hours. The parameters used are voltage (V), current strength (mA), power density (mW / m2), as well as Chemical Oxygen Demand (COD) and Biological Oxygen Demand (BOD) of waste before and after running. The data obtained were processed statistically using the Analysis of Variance (ANOVA) test to determine the significance of differences in concentration variations in each parameter. The highest average electricity was obtained at a concentration of 0.15 M of 950.3185 (mW / m2), while the decrease in COD and BOD waste obtained the highest decrease at a concentration of 0.20 M, a decrease in COD reached 96.28% and BOD reached 68.26% . Parameters of power density, COD and BOD of all variations of KMnO4 each produced significant numbers based on the ANOVA test. The significance of this parameter indicates the influence of KMnO4 on the MFC system. %Z Pembimbing : Sudarlin M.Si