eprintid: 56294
rev_number: 10
eprint_status: archive
userid: 12460
dir: disk0/00/05/62/94
datestamp: 2023-02-16 00:46:00
lastmod: 2023-02-16 00:46:00
status_changed: 2023-02-16 00:46:00
type: thesis
metadata_visibility: show
contact_email: muh.khabib@uin-suka.ac.id
creators_name: Manggala Maulana Mahardhika, NIM.: 18106060024
title: ANALISIS RISIKO KECELAKAAN KERJA MENGGUNAKAN METODE HAZARD IDENTIFICATION AND RISK ASSESSMENT (HIRA) DAN HAZARD AND OPERABILITY STUDY (HAZOP) (STUDI KASUS: WL ALUMUNIUM, YOGYAKARTA)
ispublished: pub
subjects: TA
divisions: jur_tind
full_text_status: restricted
keywords: SMK3, HIRA, HAZOP, Kecelakaan Kerja
note: Pembimbing: Dr. Eng. Ir. Cahyono Sigit Pramudyo, S.T., M.T., IPM., ASEAN Eng
abstract: Companies with high levels of potential hazards such as WL Aluminum have an obligation to implement the Occupational Health and Safety Management System (SMK3). The implementation involves all elements of the company and is mandatory as an effort to reduce and prevent work-related accidents and occupational diseases. This study aims to identify and analyze potential hazards based on the AS/NZS 4360 risk matrix in the WL Aluminum production section as a form of initial review of the implementation of SMK3. The findings then can be used to provide recommendations for improvement based on the priority scale of risk ratings. The method in this study adopts the Hazard Identification and Risk Assessment (HIRA) approach to identify the source of the hazard, along with risk assessment and analysis. On the other hand, the Hazard and Operability Study (HAZOP) method is used to analyze the causes, impacts, and control of hazards that must be carried out. The results showed 34 validated hazard sources where 9% were in the extreme hazard category, 59% in the high hazard category, 20% in the moderate hazard category, and 12% in the low hazard category. Suggestions for improvement are made with the help of the HAZOP analysis worksheet based on the known priority scale of potential hazards and 48 risk controls were obtained in this study case. Risk control measures follow the basic hierarchy of OHSAS 18001 risk control, namely substitution, technical, administrative, and personal protective equipment. Risk control is also based on the AS/NZS 4360 control strategy in the form of emphasizing the probability level and severity of a risk. The use of appropriate personal protective equipment on WL Aluminum can save an average of 56% of expenses compared to medical expenses that must be incurred.
date: 2022-11-29
date_type: published
pages: 153
institution: UIN SUNAN KALIJAGA YOGYAKARTA
department: FAKULTAS SAINS DAN TEKNOLOGI
thesis_type: skripsi
thesis_name: other
citation:   Manggala Maulana Mahardhika, NIM.: 18106060024  (2022) ANALISIS RISIKO KECELAKAAN KERJA MENGGUNAKAN METODE HAZARD IDENTIFICATION AND RISK ASSESSMENT (HIRA) DAN HAZARD AND OPERABILITY STUDY (HAZOP) (STUDI KASUS: WL ALUMUNIUM, YOGYAKARTA).  Skripsi thesis, UIN SUNAN KALIJAGA YOGYAKARTA.   
document_url: https://digilib.uin-suka.ac.id/id/eprint/56294/1/18106060024_BAB-I_IV-atau-V_DAFTAR-PUSTAKA.pdf
document_url: https://digilib.uin-suka.ac.id/id/eprint/56294/2/18106060024_BAB-II_sampai_SEBELUM-BAB-TERAKHIR.pdf