eprintid: 65687
rev_number: 10
eprint_status: archive
userid: 12460
dir: disk0/00/06/56/87
datestamp: 2024-07-09 01:15:08
lastmod: 2024-07-09 01:15:08
status_changed: 2024-07-09 01:15:08
type: thesis
metadata_visibility: show
contact_email: muh.khabib@uin-suka.ac.id
creators_name: Miftahul Fitri, NIM.: 20106060052
title: ANALISIS RISIKO PEKERJAAN UNTUK MENGURANGI TINGKAT KECELAKAAN DENGAN MENGGUNAKAN METODE HAZARD IDENTIFICATION RISK ASSESMENT AND RISK CONTROL (HIRARC) (STUDI KASUS: PT. ARJUNA PETROGAS INDONESIA)
ispublished: pub
subjects: 658.5
divisions: jur_tind
full_text_status: restricted
keywords: Potensi Bahaya, Risiko, Pengendalian, HIRARC, Drilling Job
note: Pembimbing: Ir. Khusna Dwijayanti, S.T., M.Eng, Ph.D, ASEAN Eng
abstract: PT. Arjuna Petrogas Indonesia is a service company which operates in the field of providing drilling equipment and repairing drilling wells located in Riau province. Work accidents on drilling work can occur at any time unexpectedly. The aim of this research is to minimize work accidents by using the HIRARC method. The research was carried out by identifying sources of danger in the drilling job on Rig 1, then carrying out a risk assessment to determine appropriate controls. In the drilling job section there are 3 types of work, namely the process of preparing for drilling, making rat holes, and making mouse holes with a total of 22 sources of danger for all drilling job work. Drilling jobs have a high average risk that can endanger workers and cause significant financial losses. From the potential dangers and risks, there were 3 potential mild risks (14%), 7 potential moderate risks (32%), 8 potential high risks (36%), and 4 potential extreme risks (18%). The highest risk is muscle injury, Lost Time Injury (LTI), up to death with a score of 10, then there are other risks such as minor injuries, being pinched, equipment damage, being hit by binding slings and kelly. Based on the risk assessment, 31 total controls were obtained, namely substitution control at 19%, technical engineering at 10%, administrative at 58%, and use of Personal Protective Equipment (PPE) at 13%.
date: 2024-05-28
date_type: published
pages: 115
institution: UIN SUNAN KALIJAGA YOGYAKARTA
department: FAKULTAS SAINS DAN TEKNOLOGI
thesis_type: skripsi
thesis_name: other
citation:   Miftahul Fitri, NIM.: 20106060052  (2024) ANALISIS RISIKO PEKERJAAN UNTUK MENGURANGI TINGKAT KECELAKAAN DENGAN MENGGUNAKAN METODE HAZARD IDENTIFICATION RISK ASSESMENT AND RISK CONTROL (HIRARC) (STUDI KASUS: PT. ARJUNA PETROGAS INDONESIA).  Skripsi thesis, UIN SUNAN KALIJAGA YOGYAKARTA.   
document_url: https://digilib.uin-suka.ac.id/id/eprint/65687/1/20106060052_BAB-I_IV-atau-V_DAFTAR-PUSTAKA.pdf
document_url: https://digilib.uin-suka.ac.id/id/eprint/65687/2/20106060052_BAB-II_sampai_SEBELUM-BAB-TERAKHIR.pdf