eprintid: 67436
rev_number: 10
eprint_status: archive
userid: 12460
dir: disk0/00/06/74/36
datestamp: 2024-10-02 03:33:10
lastmod: 2024-10-02 03:33:10
status_changed: 2024-10-02 03:33:10
type: thesis
metadata_visibility: show
contact_email: muh.khabib@uin-suka.ac.id
creators_name: Ibnu Izhar Apri Fadilah, NIM.: 20106060065
title: ANALISIS PENENTUAN INTERVAL WAKTU PEMELIHARAAN MESIN PRESS INJECTION DENGAN METODE RELIABILITY CENTERED MAINTENANCE II DAN AGE REPLACEMENT (STUDI KASUS: PT. BESQ SARANA ABADI)
ispublished: pub
subjects: 658.5
divisions: jur_tind
full_text_status: restricted
keywords: Pemeliharaan Preventif, Oee, Rcm Ii Decision Worksheet, Age Replacement, Perawatan
note: Pembimbing: Ir. Trio Yonathan Teja Kusuma., S.T., M.T, IPM
abstract: Manufacturing company 4.0 will be accelerating so that in the business will appear more efficient processes in production so that the business can operate smoothly and meet the goals achieved by the company. PT. BesQ Sarana Abadi is a company producing rubber and metal. Using the Overall Equipment Effectiveness method to measure the efficiency of a Press Injection machine with an OEE of 79.05%. The maintenance of the machine in the company has been implemented using Corective Maintenance. The company requires proper care based on the damage that occurs due to the treatment that can be applied, i.e. preventive care using RCM II and Age Replacement methods. Based on such research, it can be concluded that obtaining results would be proposed to implement treatment measures and time intervals of replacement of components with scheduled. As for the results of the processing on the research for maintenance measures on heater components, seal and contractor using preventive maintenance and proposed for action as scheduled discard at internal time sequence of 774 hours, 708 hours, and 867 hours. Preventive maintenance measures resulted in a cost reduction of 14%, 27% and 34% on each machine component with previous maintenance measurements.
date: 2024-08-21
date_type: published
pages: 184
institution: UIN SUNAN KALIJAGA YOGYAKARTA
department: FAKULTAS SAINS DAN TEKNOLOGI
thesis_type: skripsi
thesis_name: other
citation:   Ibnu Izhar Apri Fadilah, NIM.: 20106060065  (2024) ANALISIS PENENTUAN INTERVAL WAKTU PEMELIHARAAN MESIN PRESS INJECTION DENGAN METODE RELIABILITY CENTERED MAINTENANCE II DAN AGE REPLACEMENT (STUDI KASUS: PT. BESQ SARANA ABADI).  Skripsi thesis, UIN SUNAN KALIJAGA YOGYAKARTA.   
document_url: https://digilib.uin-suka.ac.id/id/eprint/67436/1/20106060065_BAB-I_IV-atau-V_DAFTAR-PUSTAKA.pdf
document_url: https://digilib.uin-suka.ac.id/id/eprint/67436/2/20106060065_BAB-II_sampai_SEBELUM-BAB-TERAKHIR.pdf