eprintid: 71785
rev_number: 10
eprint_status: archive
userid: 12460
dir: disk0/00/07/17/85
datestamp: 2025-07-11 09:05:15
lastmod: 2025-07-11 09:05:15
status_changed: 2025-07-11 09:05:15
type: thesis
metadata_visibility: show
contact_email: muh.khabib@uin-suka.ac.id
creators_name: Ulfa Khozanah, NIM.: 21106020015
title: PENERAPAN TEKNIK NEUTRON COMPUTED TOMOGRAPHY DENGAN RESOLUSI SPASIAL 200 MIKRON SEBAGAI METODE PENGUKURAN POROSITAS PADA BEREA SANDSTONE
ispublished: pub
subjects: 500
divisions: jur_fis
full_text_status: restricted
keywords: Porositas, Berea Sandstone, Neutron Computed Tomography (NCT), Metode Segmentasi, Citra
note: Dr. Nita Handayani S.Si, M.Si. dan Fahrurrozi Akbar M.Sc dan
abstract: Porosity is the empty space in rocks that functions as a storage place for hydrocarbons, such as oil and gas, making it a key parameter in determining the potential of a rock as a reservoir. One type of reservoir rock that is often encountered for porosity analysis is Berea sandstone. This study employs neutron computed tomography (NCT) to measure and analyze porosity in rocks, with the advantage of this technique being its ability to provide 3D visualization of porosity distribution within rocks without damaging the sample (non-destructive). The objective of this study is to determine the effectiveness of applying the neutron computed tomography (NCT) technique with a spatial resolution of 200 μm in measuring porosity in Berea sandstone. The image reconstruction stage was performed using Octopus Reconstruction 8.9 software, which produced a set of 2D images in the form of cross-sections of Berea sandstone samples in gray scale. Porosity measurements were performed using two image segmentation methods, namely automatic and manual. The porosity results using the manual segmentation method yielded porosity values for the four Berea sandstone cores of 20.03%, 20.36%, 20.50%, and 20.04%, respectively, which are close to the porosity measurement values obtained from laboratory tests using a porosimeter. The average accuracy of porosity values using the automatic segmentation method compared to laboratory test data was 45.10%, while using the manual segmentation method reached 98.86%. The high accuracy obtained using the manual method indicates that this method is more valid as it falls within the acceptable accuracy range according to SNI ISO 17025:2017 standards.
date: 2025-06-05
date_type: published
pages: 114
institution: UIN SUNAN KALIJAGA YOGYAKARTA
department: FAKULTAS SAINS DAN TEKNOLOGI
thesis_type: skripsi
thesis_name: other
citation:   Ulfa Khozanah, NIM.: 21106020015  (2025) PENERAPAN TEKNIK NEUTRON COMPUTED TOMOGRAPHY DENGAN RESOLUSI SPASIAL 200 MIKRON SEBAGAI METODE PENGUKURAN POROSITAS PADA BEREA SANDSTONE.  Skripsi thesis, UIN SUNAN KALIJAGA YOGYAKARTA.   
document_url: https://digilib.uin-suka.ac.id/id/eprint/71785/1/21106020015_BAB-I_IV-atau-V_DAFTAR-PUSTAKA.pdf
document_url: https://digilib.uin-suka.ac.id/id/eprint/71785/2/21106020015_BAB-II_sampai_SEBELUM-BAB-TERAKHIR.pdf