…
comment: The repository administrator has not yet configured an RDF license.
primary topic: http://digilib.uin-suka.ac.id/id/eprint/71816

http://digilib.uin-suka.ac.id/id/eprint/71816
type: Thesis
type: Article
title: OPTIMALISASI SETTING PARAMETER MESIN CNC PLASMA CUTTING TERHADAP AKURASI BENTUK DESAIN PADA PROSES PEMOTONGAN PLAT STAINLESS STEEL 430 DENGAN METODE TAGUCHI (STUDI KASUS: LABORATORIUM TEKNIK INDUSTRI UIN SUNAN KALIJAGA)
abstract: The manufacturing industry faces great challenges in improving the efficiency and quality of products, one of which is on the metal Cutting process using CNC Plasma Cutting machines. In the Laboratory of Industrial Engineering of UIN Sunan Kalijaga, one of the main problems encountered was the inaccuracy of the cut results against the initial design, which impacted the interruption of the assembly process, the decrease of product aesthetics, as well as causing inefficiencies in the implementation of practical time. This study aims to determine the optimal Cutting parameters to improve the dimensional accuracy of the Cutting results of stainless steel plate 430. The method used is the Taguchi Design of Experiment (DOE) with L9 orthogonal matrix, which involves four main factors, namely Cutting speed, nozzle diameter, gas pressure, power current, and electric current at three Levels, respectively. The Taguchi method was chosen due to its ability in identifying the significant influence of various process parameters with a lesser number of experiments, thus being efficient in the use of time and resources without reducing the validity of the results. Signal to Noise Ratio (S/N) and Analysis of Variance (ANOVA) analyzes were used to assess the contribution of each factor and determine the optimal combination. The results showed that the best combination of parameters was a Cutting speed of 1200 mm/min, a nozzle diameter of 1.1 mm, a gas pressure of 90 psi, and an electrical current strength of 25 A, with the largest contribution coming from the Cutting speed (97.92%). The parameters of cutting speed, nozzle diameter, and electric current have a significant influence on the accuracy of the cutting results, while gas pressure does not have a significant influence. Confirmation experiments proved this combination to be effective in improving the precision of the Cutting results validly, so this study provides practical recommendations for the improvement of Cutting quality…
date: 2025-05-26
status: published
author list: authors
type: EPrint
type: ThesisEPrint
is part of: repository
has document: http://digilib.uin-suka.ac.id/id/document/1006840
has version: http://digilib.uin-suka.ac.id/id/document/1006840
has published: http://digilib.uin-suka.ac.id/id/document/1006840
has document: http://digilib.uin-suka.ac.id/id/document/1006841
has version: http://digilib.uin-suka.ac.id/id/document/1006841
has published: http://digilib.uin-suka.ac.id/id/document/1006841
has document: http://digilib.uin-suka.ac.id/id/document/1006882
has document: http://digilib.uin-suka.ac.id/id/document/1006883
has document: http://digilib.uin-suka.ac.id/id/document/1006884
has document: http://digilib.uin-suka.ac.id/id/document/1006885
has document: http://digilib.uin-suka.ac.id/id/document/1006886
has document: http://digilib.uin-suka.ac.id/id/document/1006887
has document: http://digilib.uin-suka.ac.id/id/document/1006888
has document: http://digilib.uin-suka.ac.id/id/document/1006889
subject: 670 Teknik Industri

http://digilib.uin-suka.ac.id/id/document/1006840
type: Document
label: OPTIMALISASI SETTING PARAMETER MESIN CNC PLASMA CUTTING TERHADAP AKURASI BENTUK DESAIN PADA PROSES PEMOTONGAN PLAT STAINLESS STEEL 430 DENGAN METODE TAGUCHI (STUDI KASUS: LABORATORIUM TEKNIK INDUSTRI UIN SUNAN KALIJAGA) (Text)
has file: 21106060005_BAB-I_IV-atau-V_DAFTAR-PUSTAKA.pdf
has part: 21106060005_BAB-I_IV-atau-V_DAFTAR-PUSTAKA.pdf

http://digilib.uin-suka.ac.id/id/document/1006841
type: Document
label: OPTIMALISASI SETTING PARAMETER MESIN CNC PLASMA CUTTING TERHADAP AKURASI BENTUK DESAIN PADA PROSES PEMOTONGAN PLAT STAINLESS STEEL 430 DENGAN METODE TAGUCHI (STUDI KASUS: LABORATORIUM TEKNIK INDUSTRI UIN SUNAN KALIJAGA) (Text)

UIN SUNAN KALIJAGA YOGYAKARTA
type: Organization

FAKULTAS SAINS DAN TEKNOLOGI, UIN SUNAN KALIJAGA YOGYAKARTA
type: Organization

NIM.: 21106060005 Faisal Apriliyan Najmudin
type: Person
given name: NIM.: 21106060005
family name: Faisal Apriliyan Najmudin

http://digilib.uin-suka.ac.id/id/document/1006882
type: Document
label: OPTIMALISASI SETTING PARAMETER MESIN CNC PLASMA CUTTING TERHADAP AKURASI BENTUK DESAIN PADA PROSES PEMOTONGAN PLAT STAINLESS STEEL 430 DENGAN METODE TAGUCHI (STUDI KASUS: LABORATORIUM TEKNIK INDUSTRI UIN SUNAN KALIJAGA) (Other)
is version of: http://digilib.uin-suka.ac.id/id/document/1006841
is volatile version of: http://digilib.uin-suka.ac.id/id/document/1006841
islightbox thumbnail version of: http://digilib.uin-suka.ac.id/id/document/1006841

http://digilib.uin-suka.ac.id/id/document/1006883
type: Document
label: OPTIMALISASI SETTING PARAMETER MESIN CNC PLASMA CUTTING TERHADAP AKURASI BENTUK DESAIN PADA PROSES PEMOTONGAN PLAT STAINLESS STEEL 430 DENGAN METODE TAGUCHI (STUDI KASUS: LABORATORIUM TEKNIK INDUSTRI UIN SUNAN KALIJAGA) (Other)
is version of: http://digilib.uin-suka.ac.id/id/document/1006841
is volatile version of: http://digilib.uin-suka.ac.id/id/document/1006841
ispreview thumbnail version of: http://digilib.uin-suka.ac.id/id/document/1006841

http://digilib.uin-suka.ac.id/id/document/1006884
type: Document
label: OPTIMALISASI SETTING PARAMETER MESIN CNC PLASMA CUTTING TERHADAP AKURASI BENTUK DESAIN PADA PROSES PEMOTONGAN PLAT STAINLESS STEEL 430 DENGAN METODE TAGUCHI (STUDI KASUS: LABORATORIUM TEKNIK INDUSTRI UIN SUNAN KALIJAGA) (Other)
is version of: http://digilib.uin-suka.ac.id/id/document/1006841
is volatile version of: http://digilib.uin-suka.ac.id/id/document/1006841
ismedium thumbnail version of: http://digilib.uin-suka.ac.id/id/document/1006841

http://digilib.uin-suka.ac.id/id/document/1006885
type: Document
label: OPTIMALISASI SETTING PARAMETER MESIN CNC PLASMA CUTTING TERHADAP AKURASI BENTUK DESAIN PADA PROSES PEMOTONGAN PLAT STAINLESS STEEL 430 DENGAN METODE TAGUCHI (STUDI KASUS: LABORATORIUM TEKNIK INDUSTRI UIN SUNAN KALIJAGA) (Other)
is version of: http://digilib.uin-suka.ac.id/id/document/1006841
is volatile version of: http://digilib.uin-suka.ac.id/id/document/1006841
issmall thumbnail version of: http://digilib.uin-suka.ac.id/id/document/1006841

http://digilib.uin-suka.ac.id/id/document/1006886
type: Document
label: OPTIMALISASI SETTING PARAMETER MESIN CNC PLASMA CUTTING TERHADAP AKURASI BENTUK DESAIN PADA PROSES PEMOTONGAN PLAT STAINLESS STEEL 430 DENGAN METODE TAGUCHI (STUDI KASUS: LABORATORIUM TEKNIK INDUSTRI UIN SUNAN KALIJAGA) (Other)
is version of: http://digilib.uin-suka.ac.id/id/document/1006840
is volatile version of: http://digilib.uin-suka.ac.id/id/document/1006840
islightbox thumbnail version of: http://digilib.uin-suka.ac.id/id/document/1006840
has file: lightbox.jpg
has part: lightbox.jpg

http://digilib.uin-suka.ac.id/id/document/1006887
type: Document
label: OPTIMALISASI SETTING PARAMETER MESIN CNC PLASMA CUTTING TERHADAP AKURASI BENTUK DESAIN PADA PROSES PEMOTONGAN PLAT STAINLESS STEEL 430 DENGAN METODE TAGUCHI (STUDI KASUS: LABORATORIUM TEKNIK INDUSTRI UIN SUNAN KALIJAGA) (Other)
is version of: http://digilib.uin-suka.ac.id/id/document/1006840
is volatile version of: http://digilib.uin-suka.ac.id/id/document/1006840
ispreview thumbnail version of: http://digilib.uin-suka.ac.id/id/document/1006840
has file: preview.jpg
has part: preview.jpg

http://digilib.uin-suka.ac.id/id/document/1006888
type: Document
label: OPTIMALISASI SETTING PARAMETER MESIN CNC PLASMA CUTTING TERHADAP AKURASI BENTUK DESAIN PADA PROSES PEMOTONGAN PLAT STAINLESS STEEL 430 DENGAN METODE TAGUCHI (STUDI KASUS: LABORATORIUM TEKNIK INDUSTRI UIN SUNAN KALIJAGA) (Other)
is version of: http://digilib.uin-suka.ac.id/id/document/1006840
is volatile version of: http://digilib.uin-suka.ac.id/id/document/1006840
ismedium thumbnail version of: http://digilib.uin-suka.ac.id/id/document/1006840
has file: medium.jpg
has part: medium.jpg

http://digilib.uin-suka.ac.id/id/document/1006889
type: Document
label: OPTIMALISASI SETTING PARAMETER MESIN CNC PLASMA CUTTING TERHADAP AKURASI BENTUK DESAIN PADA PROSES PEMOTONGAN PLAT STAINLESS STEEL 430 DENGAN METODE TAGUCHI (STUDI KASUS: LABORATORIUM TEKNIK INDUSTRI UIN SUNAN KALIJAGA) (Other)
is version of: http://digilib.uin-suka.ac.id/id/document/1006840
is volatile version of: http://digilib.uin-suka.ac.id/id/document/1006840
issmall thumbnail version of: http://digilib.uin-suka.ac.id/id/document/1006840
has file: small.jpg
has part: small.jpg

https://digilib.uin-suka.ac.id/id/eprint/71816/
title: HTML Summary of #71816 OPTIMALISASI SETTING PARAMETER MESIN CNC PLASMA CUTTING TERHADAP AKURASI BENTUK DESAIN PADA PROSES PEMOTONGAN PLAT STAINLESS STEEL 430 DENGAN METODE TAGUCHI (STUDI KASUS: LABORATORIUM TEKNIK INDUSTRI UIN SUNAN KALIJAGA)
format: text/html
primary topic: http://digilib.uin-suka.ac.id/id/eprint/71816

670 Teknik Industri
type: Concept