eprintid: 71839
rev_number: 10
eprint_status: archive
userid: 12460
dir: disk0/00/07/18/39
datestamp: 2025-07-15 06:46:01
lastmod: 2025-07-15 06:46:01
status_changed: 2025-07-15 06:46:01
type: thesis
metadata_visibility: show
contact_email: muh.khabib@uin-suka.ac.id
creators_name: Eliya Afifatun Nichlah, NIM.: 21106060033
title: ANALISIS RISIKO KESELAMATAN DAN KESEHATAN KERJA (K3) MENGGUNAKAN METODE HAZARD IDENTIFICATION AND RISK ASSESSMENT (HIRA) DAN HAZARD AND OPERABILITY STUDY (HAZOP) (STUDI KASUS CV. 1SOUVENIR)
ispublished: pub
subjects: 670
divisions: jur_tind
full_text_status: restricted
keywords: K3, SMK3, HIRA, HAZOP, APD
note: Dr. Ir. Ira Setyaningsih, S.T., M.Sc., IPM., ASEAN Eng
abstract: CV. 1Souvenir is a manufacturing company engaged in the production of plaques using
various types of raw materials such as wood, acrylic, metal, and others. The production
activities at CV. 1Souvenir carry potential risks of occupational accidents, ranging
from low to extreme levels. Therefore, the implementation of the Occupational Health
and Safety Management System (OHSMS) is crucial to minimize these risks. This study
employs the Hazard Identification and Risk Assessment (HIRA) and Hazard and
Operability Study (HAZOP) methods to identify risks, assess their levels, and provide
recommendations for risk control based on the analysis of causes and impacts of each
identified risk. The results show that there are 31 potential occupational hazards
identified in the machinery area of the production division at CV. 1Souvenir Indonesia.
Based on the HIRA analysis, the distribution of risk levels is as follows: extreme risk
at 13%, high risk at 39%, medium risk at 35%, and low risk at 13%. Risk control efforts
were carried out to reduce potential hazards using the HAZOP worksheet. Risk control
measures were determined by following the OHSAS 18001 risk control hierarchy,
which includes elimination, engineering controls, administrative controls, and the use
of Personal Protective Equipment (PPE). The analysis results identified 65 control
actions, consisting of 3 substitution actions, 21 engineering controls, 22 administrative
controls, and 19 PPE-related actions.
date: 2025-05-16
date_type: published
pages: 179
institution: UIN SUNAN KALIJAGA YOGYAKARTA
department: FAKULTAS SAINS DAN TEKNOLOGI
thesis_type: skripsi
thesis_name: other
citation:   Eliya Afifatun Nichlah, NIM.: 21106060033  (2025) ANALISIS RISIKO KESELAMATAN DAN KESEHATAN KERJA (K3) MENGGUNAKAN METODE HAZARD IDENTIFICATION AND RISK ASSESSMENT (HIRA) DAN HAZARD AND OPERABILITY STUDY (HAZOP) (STUDI KASUS CV. 1SOUVENIR).  Skripsi thesis, UIN SUNAN KALIJAGA YOGYAKARTA.   
document_url: https://digilib.uin-suka.ac.id/id/eprint/71839/1/21106060033_BAB-I_IV-atau-V_DAFTAR-PUSTAKA.pdf
document_url: https://digilib.uin-suka.ac.id/id/eprint/71839/2/21106060033_BAB-II_sampai_SEBELUM-BAB-TERAKHIR.pdf