eprintid: 71852
rev_number: 10
eprint_status: archive
userid: 12460
dir: disk0/00/07/18/52
datestamp: 2025-07-15 07:16:13
lastmod: 2025-07-15 07:16:13
status_changed: 2025-07-15 07:16:13
type: thesis
metadata_visibility: show
contact_email: muh.khabib@uin-suka.ac.id
creators_name: Much. Hafiddin Al Ma’sum, NIM.: 21106060074
title: OPTIMASI FORMULASI DALAM KOMPON RUBBER SEBAGAI MATERIAL SPAREPART MENGGUNAKAN METODE TAGUCHI (STUDI KASUS: PT BESQ SARANA ABADI)
ispublished: pub
subjects: 670
divisions: jur_tind
full_text_status: restricted
keywords: ANOVA, Carbon, Filler, Kualitas Produk, Kompon Rubber, Metode Taguchi, Oil, Optimasi Komposisi Rubber, Sifat Mekanis, Sparepart Otomotif
note: Ir. Khusna Dwijayanti, S. T., M. Eng., Ph. D., ASEAN. Eng
abstract: The rubber-based sparepart industry in Indonesia including PT. BESQ Sarana Abadi faces critical challenges in maintaining consistent product quality and optimizing production efficiency. One of the major problems encountered is the inconsistency in rubber compound formulations especially in grommet products resulting in a 19% defect rate from total production in January 2025 and increasing production costs by approcimately 10%. This issue highlights the need for a systematic and efficient approach to identify the optimal formulation of rubber compounds. This research employs the Taguchi Method as an effective experimental design technique to determine the best combination of three main parameters: carbon, filler, and oil each tested at three levels. The experiments were conducted using the open mill lab machine at PT. BESQ Sarana Abadi and the mechanical properties evaluated included hardness, tensile strength, elongation, and rheometer data. Data analysis utilized Minitab software through the application of Signal to Noise Ratio (S/N) and Analysis of Variance (ANOVA) to assess the influence and contribution of each factor. The experimental results revealed that the optimal parameter combination is 80 phr carbon, 40 phr filler, and 70 phr oil. Among these factors oil was identified as the most significant contributor to product quality with a contribution value of 71,07%. Therefore, the application of the Taguchi Method has proven effective in optimizing rubber compound formulation to improve hardness, tensile strength, elongation, and rheometer characteristics.
date: 2025-05-26
date_type: published
pages: 150
institution: UIN SUNAN KALIJAGA YOGYAKARTA
department: FAKULTAS SAINS DAN TEKNOLOGI
thesis_type: skripsi
thesis_name: other
citation:   Much. Hafiddin Al Ma’sum, NIM.: 21106060074  (2025) OPTIMASI FORMULASI DALAM KOMPON RUBBER SEBAGAI MATERIAL SPAREPART MENGGUNAKAN METODE TAGUCHI (STUDI KASUS: PT BESQ SARANA ABADI).  Skripsi thesis, UIN SUNAN KALIJAGA YOGYAKARTA.   
document_url: https://digilib.uin-suka.ac.id/id/eprint/71852/1/21106060074_BAB-I_IV-atau-V_DAFTAR-PUSTAKA.pdf
document_url: https://digilib.uin-suka.ac.id/id/eprint/71852/2/21106060074_BAB-II_sampai_SEBELUM-BAB-TERAKHIR.pdf