eprintid: 76361
rev_number: 10
eprint_status: archive
userid: 12460
dir: disk0/00/07/63/61
datestamp: 2026-05-12 01:32:44
lastmod: 2026-05-12 01:32:44
status_changed: 2026-05-12 01:32:44
type: thesis
metadata_visibility: show
contact_email: muh.khabib@uin-suka.ac.id
creators_name: Ayu Afrilia Nurhalizah, NIM.: 22106060083
title: ANALISIS RISIKO KESELAMATAN KERJA PADA AKTIVITAS OPERASIONAL DI WORKSHOP MENGGUNAKAN METODE HAZARD IDENTIFICATION, RISK ASSESSMENT, AND RISK CONTROL (HIRARC) (STUDI KASUS PT. KMX)
ispublished: pub
subjects: 670
divisions: jur_tind
full_text_status: restricted
keywords: HIRARC, , Risiko, Workshop, Pengendalian
note: Dr. Ir. Ira Setyaningsih, S.T., M.Sc., IPM., ASEAN Eng.
abstract: The operational working environment at the PT. KMX workshop poses significant hazards that threaten workers’ safety and health, particularly during welding, assembly, and heavy machinery repair activities. Data from 2025 indicates workplace accidents resulting in serious physical injuries and fatalities, thereby necessitating a comprehensive occupational safety analysis. This study aims to identify potential hazards, determine risk values using the HIRARC method (Hazard Identification, Risk Assessment, and Risk Control), and provide recommendations for risk control at the PT. KMX workshop. This study employs the HIRARC method, with data collected through observation, interviews, and questionnaires administered to 25 respondents. Risk assessment was conducted by measuring the likelihood and severity of risks, followed by the determination of risk controls based on the hierarchy of controls. The analysis results revealed 15 types of potential hazards with 39 specific risks arising from 12 operational activities. The assessment results indicated 5 high-category risks (such as dense welding fumes and fire hazards), 32 medium-category risks (such as physical fatigue and hand entrapment), and 2 low-category risks. The analysis identified a total of 39 risks in workshop operational activities. Risk control recommendations were formulated based on the hierarchy of controls, prioritising substitution and engineering controls to address risks at source, supported by administrative controls and the use of Personal Protective Equipment (PPE).
date: 2026-04-16
date_type: published
pages: 108
institution: UIN SUNAN KALIJAGA YOGYAKARTA
department: FAKULTAS SAINS DAN TEKNOLOGI
thesis_type: skripsi
thesis_name: other
citation:   Ayu Afrilia Nurhalizah, NIM.: 22106060083  (2026) ANALISIS RISIKO KESELAMATAN KERJA PADA AKTIVITAS OPERASIONAL DI WORKSHOP MENGGUNAKAN METODE HAZARD IDENTIFICATION, RISK ASSESSMENT, AND RISK CONTROL (HIRARC) (STUDI KASUS PT. KMX).  Skripsi thesis, UIN SUNAN KALIJAGA YOGYAKARTA.   
document_url: https://digilib.uin-suka.ac.id/id/eprint/76361/1/22106060083_BAB-I_IV-atau-V_DAFTAR-PUSTAKA.pdf
document_url: https://digilib.uin-suka.ac.id/id/eprint/76361/2/22106060083_BAB-II_sampai_SEBELUM-BAB-TERAKHIR.pdf