eprintid: 76876
rev_number: 10
eprint_status: archive
userid: 12460
dir: disk0/00/07/68/76
datestamp: 2026-06-17 02:36:09
lastmod: 2026-06-17 02:36:09
status_changed: 2026-06-17 02:36:09
type: thesis
metadata_visibility: show
contact_email: muh.khabib@uin-suka.ac.id
creators_name: Dani Darmawan, NIM.: 22106060045
title: IDENTIFIKASI DAN ANALISIS RISIKO KECELAKAAN KERJA PADA PROSES PRODUKSI MENGGUNAKAN METODE HAZARD IDENTIFICATION AND RISK ASSESSMENT (HIRA) DAN HAZARD AND OPERABILITY STUDY (HAZOP) (STUDI KASUS: CV. JAGAL KAYU SEJAHTERA ABADI)
ispublished: pub
subjects: 670
divisions: jur_tind
full_text_status: restricted
keywords: Bahaya, Risiko, K3, HIRA, HAZOP, Pengendalian
note: Gunawan Budi Susilo, M. Eng.
abstract: CV. Jagal Kayu Sejahtera Abadi is a manufacturing company engaged in the
production of wooden tableware, kitchenware, and handicrafts using a make-toorder
production system. The complexity of the production process involving
machinery, wood materials, and manual work activities creates various potential
hazards that may lead to workplace accidents and disrupt production targets.
Therefore, systematic hazard identification, risk assessment, and risk control efforts
are required. This study aims to identify potential hazards, assess risk levels using
the Hazard Identification and Risk Assessment (HIRA) method, and provide risk
control recommendations through the Hazard and Operability Study (HAZOP)
method. Hazard validation was conducted using the Content Validity Ratio (CVR)
method based on assessments from five supervisor-level workers to ensure the
relevance of identified hazards. Risk levels were determined by combining severity
and likelihood values using a risk matrix. The results identified 19 validated hazard
sources, dominated by chemical hazards such as wood dust, sanding dust, coating
vapor exposure, and fire potential. The sanding process had the highest number of
hazard findings, while the shaping process showed the highest average risk score
of 20. Risk classification consisted of 16% extreme, 26% high, 42% moderate, and
16% low categories. Proposed risk controls included 10 substitution actions, 16
engineering controls, 19 administrative controls, and 15 uses of personal protective
equipment (PPE). Additional recommendations included occupational safety SOPs,
hazard posters, safety signs, work accident report sheets, and first aid kit standards
to support a safer working environment.
date: 2026-05-25
date_type: published
pages: 143
institution: UIN SUNAN KALIJAGA YOGYAKARTA
department: FAKULTAS SAINS DAN TEKNOLOGI
thesis_type: skripsi
thesis_name: other
citation:   Dani Darmawan, NIM.: 22106060045  (2026) IDENTIFIKASI DAN ANALISIS RISIKO KECELAKAAN KERJA PADA PROSES PRODUKSI MENGGUNAKAN METODE HAZARD IDENTIFICATION AND RISK ASSESSMENT (HIRA) DAN HAZARD AND OPERABILITY STUDY (HAZOP) (STUDI KASUS: CV. JAGAL KAYU SEJAHTERA ABADI).  Skripsi thesis, UIN SUNAN KALIJAGA YOGYAKARTA.   
document_url: https://digilib.uin-suka.ac.id/id/eprint/76876/1/22106060045_BAB-I_IV-atau-V_DAFTAR-PUSTAKA.pdf
document_url: https://digilib.uin-suka.ac.id/id/eprint/76876/2/22106060045_BAB-II_sampai_SEBELUM-BAB-TERAKHIR.pdf