@prefix epid: .
@prefix void: .
@prefix xsd: .
@prefix cc: .
@prefix ep: .
@prefix eprel: .
@prefix dc: .
@prefix bibo: .
@prefix geo: .
@prefix owl: .
@prefix event: .
@prefix skos: .
@prefix foaf: .
@prefix rdfs: .
@prefix rdf: .
@prefix dct: .
<>
foaf:primaryTopic ;
rdfs:comment "The repository administrator has not yet configured an RDF license."^^xsd:string .
dct:hasPart ;
ep:hasFile ;
rdf:type bibo:Document,
ep:Document;
rdfs:label "ANALISIS WASTE PADA PROSES PRODUKSI BATIK TULIS TEKNO CUSTOM MELALUI PENDEKATAN LEAN MANUFACTURING UNTUK PENINGKATAN PROCESS CYCLE EFFICIENCY (STUDI KASUS: BATIK XYZ) (Text)"^^xsd:string .
rdf:type bibo:Document,
ep:Document;
rdfs:label "ANALISIS WASTE PADA PROSES PRODUKSI BATIK TULIS TEKNO CUSTOM MELALUI PENDEKATAN LEAN MANUFACTURING UNTUK PENINGKATAN PROCESS CYCLE EFFICIENCY (STUDI KASUS: BATIK XYZ) (Text)"^^xsd:string .
rdf:_1 .
bibo:abstract "Batik XYZ is a techno-custom batik manufacturing company\r\nthat integrates machine-based klowong processes with manual\r\nisen-isen processes, which potentially leads to imbalance in\r\nproduction flow. This condition triggers various types of waste,\r\nincluding excessive waiting time, accumulation of WIP, and\r\nrework activities caused by defects, all which directly impact\r\nthe low efficiency of the production process. This study aims to\r\nidentify and analyze waste, as well as to propose improvement\r\nrecommendations to enhance the PCE in the production of\r\nKlowong Renjana batik motifs. The approach used in this\r\nstudy is lean manufacturing, employing methods such as VSM,\r\nWAM, VALSAT, PAM, and root cause analysis using the 5\r\nwhys method. The results indicate that dominant wastes are\r\ndefects (22.06%), unnecessary motion (16.69%),\r\noverproduction (16.15%), waiting (15.01%), and unnecessary\r\ninventory (14.41%). The imbalance in capacity between the\r\nklowong and isen-isen processes leads to a significant\r\naccumulation of waiting time, with delays accounting for\r\n85.62% of the total production time. The VALSAT analysis\r\nidentifies PAM as the most appropriate tool, indicating a high\r\ndominance of NVA activities at 85.78%. The proposed\r\nimprovements focus on controlling the production flow\r\nthrough the implementation of pull systems, continuous flow,\r\nstandardized work, 5S, and built-in quality. The\r\nimplementation results in the future state VSM show a\r\nreduction in lead time from 83,760 seconds to 24,161.831\r\nseconds, along with an increase in PCE from 9.82% to 32.2%,\r\nindicating a more efficient production flow that aligns more\r\nclosely with lean principles."^^xsd:string;
bibo:authorList ;
bibo:status ;
dc:hasVersion ,
;
dct:creator ;
dct:date "2026-05-13";
dct:isPartOf ;
dct:issuer ,
;
dct:subject ;
dct:title "ANALISIS WASTE PADA PROSES PRODUKSI BATIK TULIS TEKNO CUSTOM MELALUI PENDEKATAN LEAN MANUFACTURING UNTUK PENINGKATAN PROCESS CYCLE EFFICIENCY (STUDI KASUS: BATIK XYZ)"^^xsd:string;
ep:hasDocument ,
;
ep:hasPublished ,
;
rdf:type bibo:Article,
bibo:Thesis,
ep:EPrint,
ep:ThesisEPrint;
rdfs:seeAlso .
rdf:type skos:Concept;
skos:prefLabel "670 Teknik Industri" .
rdfs:label "22106060061_BAB-I_IV-atau-V_DAFTAR-PUSTAKA.pdf"^^xsd:string .
dc:format "text/html";
dc:title "HTML Summary of #76882 \n\nANALISIS WASTE PADA PROSES PRODUKSI BATIK TULIS TEKNO CUSTOM MELALUI PENDEKATAN LEAN MANUFACTURING UNTUK PENINGKATAN PROCESS CYCLE EFFICIENCY (STUDI KASUS: BATIK XYZ)\n\n";
foaf:primaryTopic .
dct:hasPart ;
foaf:name "UIN SUNAN KALIJAGA YOGYAKARTA"^^xsd:string;
rdf:type foaf:Organization .
dct:isPartOf ;
foaf:name "FAKULTAS SAINS DAN TEKNOLOGI, UIN SUNAN KALIJAGA YOGYAKARTA"^^xsd:string;
rdf:type foaf:Organization .
foaf:familyName "Nafa Elifah Khairunnisa"^^xsd:string;
foaf:givenName "NIM.: 22106060061"^^xsd:string;
foaf:name "NIM.: 22106060061 Nafa Elifah Khairunnisa"^^xsd:string;
rdf:type foaf:Person .