eprintid: 80116 rev_number: 10 eprint_status: archive userid: 12243 dir: disk0/00/08/01/16 datestamp: 2026-11-20 06:41:58 lastmod: 2026-11-20 06:41:58 status_changed: 2026-11-20 06:41:58 type: thesis metadata_visibility: show contact_email: muchti.nurhidaya@uin-suka.ac.id creators_name: Fadhil Muti Aslam, NIM.: 21106060081 title: PENCEGAHAN RISIKO KECELAKAAN KERJA PADA RUANG PRODUKSI DENGAN MENGGUNAKAN METODE HAZARD IDENTIFICATION, RISK ASSESSMENT AND RISK CONTROL (STUDI KASUS : UD. PRIMA SAKTI) ispublished: pub subjects: 670 divisions: jur_tind full_text_status: restricted keywords: Occupational Health and Safety; HIRARC; risk assessment; fishbone diagram; UD. Prima Sakti note: Ir. Herninanjati Paramawardhani, M.Sc., IPM., abstract: UD. Prima Sakti is a company engaged in turning, milling, gear manufacturing, and rubber roll and seal production services located in Semarang City. Based on recorded workplace accident data, various incidents were found, ranging from cuts and eye irritation caused by welding to a serious incident involving a hand caught in a CNC machine lever. This condition indicates that the implementation of Occupational Health and Safety (OHS) in the production area of UD. Prima Sakti still needs to be improved through systematic hazard identification, risk assessment, and risk control. This study aims to identify hazards, assess risk levels, and determine risk control measures for occupational accidents in the production area of UD. Prima Sakti using the Hazard Identification, Risk Assessment, and Risk Control (HIRARC) method, reinforced with Root Cause Analysis (RCA) using a fishbone diagram. Data were collected through observation, interviews, and documentation covering eleven types of machines and work activities. The results show that 43 potential hazards were identified, consisting of 2 hazards classified as extreme risk, 18 as high risk, 18 as moderate risk, and 5 as low risk. Two extreme risks, namely exposure to ultraviolet and infrared radiation at the Welding machine (score 15) and excessive metal lifting at the CNC Lathe Mitsubishi machine (score 20), were further analyzed using a fishbone diagram and found to be caused by human, method, material, and machine factors. Risk control recommendations were developed based on the hierarchy of controls, including engineering controls, administrative controls, and the use of personal protective equipment, to reduce the risk levels of both activities. date: 2026-08-05 date_type: published pages: 105 institution: UIN SUNAN KALIJAGA YOGYAKARTA department: FAKULTAS SAINS DAN TEKNOLOGI thesis_type: skripsi thesis_name: other citation: Fadhil Muti Aslam, NIM.: 21106060081 (2026) PENCEGAHAN RISIKO KECELAKAAN KERJA PADA RUANG PRODUKSI DENGAN MENGGUNAKAN METODE HAZARD IDENTIFICATION, RISK ASSESSMENT AND RISK CONTROL (STUDI KASUS : UD. PRIMA SAKTI). Skripsi thesis, UIN SUNAN KALIJAGA YOGYAKARTA. document_url: https://digilib.uin-suka.ac.id/id/eprint/80116/1/21106060081_BAB-I_IV-atau-V_DAFTAR-PUSTAKA.pdf document_url: https://digilib.uin-suka.ac.id/id/eprint/80116/2/21106060081_BAB-II_sampai_SEBELUM-BAB-TERAKHIR.pdf